SALONI

Guides/6 min read

Herd Size and TMR Volume: Sizing 3, 5, and 9 m³ Mixers

Translate head count and dry matter intake into batch size, choose the right m³ tank, and keep mix quality stable across one or two daily loads.

Batch math from intake, not guesswork

Start with dry matter intake per head for each group, multiplied by animals fed in that pen. Convert to as-fed weight using your ration dry matter percent, then add a shrink allowance for refusal and spillage typical in your facility. Divide total daily as-fed by the number of mixes you want: one full batch simplifies labor but demands a larger tub; two smaller batches can improve freshness if refusals run high. Record actual scale weights for two weeks before locking tank size—nutrition spreadsheets often underestimate hay density when it is fluffed versus settled in the tub.

Mapping head count to m³ capacity

A 3 m³ vertical mixer fits many heifer, dry-cow, or satellite pens where daily as-fed per mix stays roughly in the 1.5 to 2.2 tonne range, depending on ration moisture. The 5 m³ class is the workhorse for 80 to 120 milking cows when you target one primary lactating ration and accept moderate compaction at the auger. Step up to 9 m³ when a single mix must cover 150 to 220 cows or when you carry heavy corn silage and haylage that swell above nominal volume. Never spec to 100 percent physical fill: leave headspace so the auger can circulate without packing the top layer, and so you can add supplements mid-batch without overflow at discharge.

Loads per day and labor windows

Feeding twice daily with one mix can mean oversized batches that sit in the tub between passes; splitting pens or using two smaller tanks sometimes lowers sorting at the bunk. If you mix once in the morning for all-day delivery, align Tractor PTO time with milking parlor traffic so you are not blocking cow flow. Track minutes per load: load order, Auger Speed changes for hay versus silage, and discharge along the feed fence. Operations that routinely exceed 45 minutes per cycle for a given pen are often under-tanked on volume or over-tanked on head count in a single group.

Weighing accuracy and ration consistency

Optional scale systems with roughly ±1 kg resolution help small batches in 3 m³ tanks stay on formula when micro-ingredients matter. In 9 m³ loads, verify that the display updates quickly enough when the last ton of silage enters—you want to avoid coasting past target because the auger already buried the sensor logic. Calibrate on a schedule tied to mixer use, not only at installation. Store mix sheets by tank size so new operators do not copy Auger Speed and mix duration from a different m³ class. Consistent batches reduce milk variance and make feed audits straightforward for co-ops and integrators.

Size toward your peak pen count: 3 m³ for starter batches, 5 m³ for mid-size dairies, 9 m³ when one load must feed 150+ milking cows.

View details →

Request a quote for recommended models

Request a Quote

We reply within 1 business day. Prices are quoted case by case — never published as fixed retail.

WhatsAppRequest Quote